You are required to read and agree to the below before accessing a full-text version of an article in the IDE article repository.

The full-text document you are about to access is subject to national and international copyright laws. In most cases (but not necessarily all) the consequence is that personal use is allowed given that the copyright owner is duly acknowledged and respected. All other use (typically) require an explicit permission (often in writing) by the copyright owner.

For the reports in this repository we specifically note that

  • the use of articles under IEEE copyright is governed by the IEEE copyright policy (available at http://www.ieee.org/web/publications/rights/copyrightpolicy.html)

  • the use of articles under ACM copyright is governed by the ACM copyright policy (available at http://www.acm.org/pubs/copyright_policy/)

  • technical reports and other articles issued by M‰lardalen University is free for personal use. For other use, the explicit consent of the authors is required

  • in other cases, please contact the copyright owner for detailed information

By accepting I agree to acknowledge and respect the rights of the copyright owner of the document I am about to access.

If you are in doubt, feel free to contact webmaster@ide.mdh.se

Towards a generic design method for reconfigurable manufacturing systems: Analysis and synthesis of current design methods and evaluation of supportive tools

Authors:

Ann-Louise Andersen , Thomas Ditlev Brunoe , Kjeld Nielsen , Carin Rösiö

Publication Type:

Journal article

Venue:

Journal of Manufacturing Systems


Abstract

In today’s global manufacturing environment, changes are inevitable and something that every manufacturer must respond to and take advantage of, whether it is in regards to technology changes, product changes, or changes in the manufacturing processes. The reconfigurable manufacturing system (RMS) meets this challenge through the ability to rapidly and efficiently change capacity and functionality, which is the reason why it has been widely labelled the manufacturing paradigm of the future. However, design of the RMS represents a significant challenge compared to the design of traditional manufacturing systems, as it should be designed for efficient production of multiple variants, as well as multiple product generations over its lifetime. Thus, critical decisions regarding the degree of scalability and convertibility of the system must be considered in the design phase, which affects the abilities to reconfigure the system in accordance with changes during its operating lifetime. However, in current research it is indicated that conventional manufacturing system design methods do not support the design of an RMS and that a systematic RMS design method is lacking, despite the fact that numerous contributions exist. Moreover, there is currently only limited evidence for the breakthrough of reconfigurability in industry. Therefore, the research presented in this paper aims at synthesizing current contributions into a generic method for RMS design. Initially, currently available design methods for RMS are reviewed, in terms of classifying and comparing their content, structure, and scope, which leads to a synthesis of the reviewed methods into a generic design method. In continuation of this, the paper includes a discussion of practical implications related to carrying out the design, including an identification of potential challenges and an assessment of which tools that can be applied to support the design. Conclusively, further areas for research are indicated, which provides valuable knowledge of how to develop and realize the benefits of reconfigurability in industry.

Bibtex

@article{Andersen5031,
author = {Ann-Louise Andersen and Thomas Ditlev Brunoe and Kjeld Nielsen and Carin R{\"o}si{\"o}},
title = {Towards a generic design method for reconfigurable manufacturing systems: Analysis and synthesis of current design methods and evaluation of supportive tools},
volume = {00},
number = {00},
pages = {179--195},
month = {December},
year = {2017},
journal = {Journal of Manufacturing Systems},
url = {http://www.ipr.mdu.se/publications/5031-}
}